Should you put knobs or pulls on kitchen cabinets?

Should you put knobs or pulls on kitchen cabinets? There are no strict rules to follow when choosing whether to select a knob or a pull or both. One preference is to use knobs for all doors and pulls for all drawers. For any large door such as a pantry and any pull-out door (including pull-out base pantries or trash pull-outs), use a pull.

Does cabinet hardware need to match door knobs? No, door handles and knobs don’t need to match throughout your house. However, it is still crucial that each door handle remains consistent with the house’s overall style. Also, the handles and knobs should coordinate with the style of the doors and rooms.

What knobs look best on white kitchen cabinets? Hardware on white cabinets will stand out and steal the show, so it’s a great opportunity to go bold! If you have warm tones, go with gold, black, or bronze hardware. If you have a cold grey tone, then silver, pewter, black, and stainless steel hardware will work.

Can you mix pulls and knobs on cabinets? Yes, you can mix knobs and pulls. It’s recommended to use pulls for cabinets that are higher up and knobs for lower style cabinets. Lower drawers that slide are typically fitted with a pull handle.

Should you put knobs or pulls on kitchen cabinets? – Additional Questions

Do hinges and pulls have to match?

Door handles, fixtures and fittings, and other hardware don’t have to match exactly, but they should blend together to make a harmonious space. If you want a cohesive aesthetic, select hardware that’s a similar colour to the finish on your fixtures and appliances.

Do knobs go on drawers or doors?

Knobs are most commonly used for cabinet doors, while pulls are used for both drawers and doors.

Should cabinet pulls all be the same size?

There is no right or wrong size to choose, but we do recommend choosing pulls that have at least a 3-3/4″ center to center (the distance between the screw holes). This size looks pleasing on most cabinets, while still being large enough to grip comfortably.

What size pulls for 42 inch cabinets?

Cabinet doors 24-36 inches tall are best adorned with pulls 7-12 inches long, while cabinets taller than 36 inches such as pantries, built-in appliances and pullouts should be accompanied by pulls longer than 12 inches.

What is the best size for cabinet pulls?

What usually looks best is a pull length that is about 1/3 the height of the cabinet door and 1/3 the width of the cabinet drawer. Your eyes follow the length of the pull up the height of the door or across the width of the drawer. Pulls don’t have to all be the same length as long as the pull design is the same.

What size pulls for 30 inch drawers?

Small Drawers that are 12” or less typically work best with a pull that is 3” to 4” long or a knob that is 1” in diameter. Large Drawers that are 30” to 48″will require a pull that is longer than 8″ or a knob that is 1″ in diameter or greater. Using two pulls or knobs for a large drawer also works great.

What size cabinet pulls for 30 inch cabinet?

As we mentioned above, for cabinet drawers 30 inches wide or more we would recommend a pull 5 inches or longer, OR two pulls 3 inches to 5 inches long each. This is necessary because the longer a drawer gets the more weight it can hold and the harder it may be to open.

Can you mix cabinet pull sizes?

There’s no “rule”, it’s a matter of looking at as many kitchens as possible and figuring out the look you prefer. I also used a variety of sized pulls on drawers of different widths, and used Restoration Hardware.

How do you measure for cabinet pulls?

To find the center-to-center measurement, use a screwdriver to remove your current pulls, then take a ruler or measuring tape and measure from the center of one screw hole to the center of the other screw hole.

How do I choose kitchen cabinet hardware?

Where should knobs be placed on kitchen cabinets?

Cabinet knobs should be installed on the stile opposite the hinges. The general rule is to place a knob 2 1/2″ – 3″ from the corner of the door. For upper cabinets, install knobs in the bottom corners of the door. For lower cabinets, place them in the upper corners.

How do you install cabinet knobs without templates?

Where do pulls go on Shaker cabinets?

Center of the Stile: Knobs and pulls can be placed halfway up the stile of your Shaker door. Keep in mind you’ll want to be able to reach the handles, since they will be placed higher up along the stile. Just Above or Below the Corners: Place the knobs or pulls 2” to 3” from the lower or upper corner.

How do I make a jig for cabinet handles?

How do you install cup pulls?

Are cup pulls in style?

Used most commonly in traditional and transitional style kitchens, cup pulls are an excellent way to add an extra pop of personality to cabinetry. Because of the size and configuration of cup pulls they are typically only installed on drawer doors.

Should cup pulls be centered?

Cup Pulls: Cup pulls are only ever used on drawers, and I like to center them in the middle of the drawer slab. If you have a 5 piece drawer (top and bottom rails, inside panel, and side rails) you want to make sure the hardware itself will fit (centered) in the middle panel before purchasing and installing.